Month: May 2021

Related Products of 108-53-2, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.108-53-2, name is 2-Aminopyrimidin-4(1H)-one, molecular formula is C4H5N3O, molecular weight is 111.102, as common compound, the synthetic route is as follows.

In a three neck IL round bottom flask equipped with reflux condenser was added 2-amino- 4(3H)-pyrimidinone A.ll (10Og, 0.9 mol) (available from Toronto Research Chemicals) followed by POCl3 (168 ml, 1.800mol) at room temperature and under an atmosphere of N2. To this was cautiously added ClSO3H (4.8ml, 72.01 mmol). The solution was heated to 950C for 4 hrs, before it was cooled to room temperature. The solution was then cooled in an ice bath before it was poured into 700ml of ice water with vigorous stirring. Adjusted the pH to ~7 with NH4OH (30% by weight) (temperature was held below 2O0C). A tan colored solid was collected by filtration. The solid was dried under vacuum at 7O0C overnight to afford 4-chloro- 2-pyrimidinamine A.12 (108g, 92%) as an off white solid.1H NMR (400 MHz, (CD)3SO) delta 8.17 (d, J = 5.2 Hz, IH), 7.07 (br s, 2H), 6.64 (d, J = 5.2 Hz, IH); ESI MS: M + H+ 130.0 m/z.

Statistics shows that 108-53-2 is playing an increasingly important role. we look forward to future research findings about 2-Aminopyrimidin-4(1H)-one.

Reference:
Patent; AMGEN INC.; WO2009/158011; (2009); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Electric Literature of 16019-33-3 , The common heterocyclic compound, 16019-33-3, name is 2-(4,6-Dichloropyrimidin-5-yl)acetaldehyde, molecular formula is C6H4Cl2N2O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

(1R,2S,3R,5R)-3-Amino-5-(hydroxymethyl)cyclopentane-1,2-diol hydrochloride (40 g, 218 mmol) was dissolved at room temperature in methanol (400 mL) and 2,2-dimethoxypropane (54 mL, 436 mmol), and methanesulfonic acid(14 mL, 218 mmol) was added thereto dropwise in an ice bath with stirring so as to keep the internal temperature at 7C or lower. After the mixture was stirred in an ice bath for 5 minutes and at room temperature overnight, triethylamine (122 mL, 872 mmol) was added thereto dropwise in an ice bath so as to keep the internal temperature at 10C or lower. After the mixture was stirred in an ice bath for 5 minutes and at room temperature for 30 minutes, the solvent was distilled off under reduced pressure, thereby obtaining the title compound as a crude isomeric mixture (102 g). LCMS (ESI) m/z 188 [M+H]+ The crude isomeric mixture (102 g) of ((3aR,4R,6R,6aS)-6-amino-2,2-dimethyltetrahydro-3aH-cyclopenta[d][1,3]dioxol-4-yl)methanol and (4aR,6R,7S,7aR)-6-amino-2,2-dimethylhexahydrocyclopenta[d][1,3]dioxin-7-ol obtained in step 1 of Reference Example 93, and 2-(4,6-dichloropyrimidin-5-yl)acetaldehyde (46 g, 240 mmol) was suspended in 2-butanol (400 mL). Then, triethylamine (61 mL, 436 mmol) was added thereto at room temperature, and the reaction solution was stirred at 80C overnight. After the reaction solvent was distilled off under reduced pressure, the residue was partitioned with the addition of ethyl acetate and an aqueous sodium hydrogen carbonate solution, followed by extraction with ethyl acetate. The organic layer was washed with saturated saline, and dried over sodium sulfate, followed by distilling off the solvent, thereby obtaining the title compound as a crude isomeric mixture (72 g). LCMS (ESI) m/z 324 [M+H]+

The synthetic route of 16019-33-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Taiho Pharmaceutical Co., Ltd.; ISHIDA, Keiji; (139 pag.)EP3395345; (2018); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Reference of 5750-76-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 5750-76-5, name is 2,4,5-Trichloropyrimidine, molecular formula is C4HCl3N2, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

A mixture of 2- (isopropylsulfonyl) aniline (1 g, 5 mmol)And 2,4,5-trichloropyrimidine (1.1 g, 6 mmol)Was dissolved in N, N-dimethylformamide (30 mL)Sodium hydride (60%, 0.4 g, 10 mmol) was added,25 C for 12 hours.(30 mL x 3), the organic phase was combined, washed with saturated brine, dried over anhydrous sodium sulfate, concentrated in vacuo,The crude product was purified by silica gel column chromatography (petroleum ether: ethyl acetate = 25: 1)The product (0.8 g, yield 46%) was obtained.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 5750-76-5, 2,4,5-Trichloropyrimidine.

Reference:
Patent; Shandong Xuanzhu Pharma Co., Ltd.; Wu, Yongqian; (21 pag.)CN106146525; (2016); A;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Electric Literature of 131860-97-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 131860-97-4, name is (E)-Methyl 2-(2-((6-chloropyrimidin-4-yl)oxy)phenyl)-3-methoxyacrylate, molecular formula is C15H13ClN2O4, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Methyl (£)-2-{2-[6-chloropyiimidin-4-yloxy]phenyl}-3-methoxyacrylate (E) (3g of 95.4% strength) was charged to the reaction tube followed by the solvent (10 ml) then 2- cyanophenol (1.2g), base (1.5 mol equivalents) and the compound being tested as a catalyst (15 mol%). The reaction mixtures were held, with stirring, at 400C for 4hrs, then at 6O0C for 2 hrs. The reaction was monitored for formation of product, throughout the hold period, by Gas Chromatography. Results are recorded as area % levels of methyl (£)-2-{2-[6- chloropyrimidin-4-yloxy]phenyl}-3-methoxyacrylate (II) and methyl (E)-2-{2-[6-(2- cyanophenoxy)pyrimidin-4-yloxy]phenyl}-3-methoxyacrylate (I) in the reaction mixture.The following systems were tested:TABLE l The results are shown in Table 2 below:TABLE 2

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 131860-97-4, (E)-Methyl 2-(2-((6-chloropyrimidin-4-yl)oxy)phenyl)-3-methoxyacrylate.

Reference:
Patent; SYNGENTA LIMITED; WO2008/43977; (2008); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Adding a certain compound to certain chemical reactions, such as: 769-42-6, 1,3-Dimethylbarbituric acid, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, category: pyrimidines, blongs to pyrimidines compound. category: pyrimidines

General procedure: To a solution of L-proline-melamine complex (3 mol%) in DMSO (2 mL) was added dimedone 0.025 mg (0.178 mmol), malononitrile (1 equiv) and benzaldehyde / isatin (1 equiv) and stirred at room temperature for 1-20 min. After completion of the reaction (monitored by TLC), ethyl acetate was added stirring and continued for another 5 min. The precipitate formed was filtered. Evaporation of solvent gave the crude product which was recrystallized using ethanol to give the pure compound.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,769-42-6, 1,3-Dimethylbarbituric acid, and friends who are interested can also refer to it.

Reference:
Article; Nagaraju, Sakkani; Paplal, Banoth; Sathish, Kota; Giri, Santanab; Kashinath, Dhurke; Tetrahedron Letters; vol. 58; 44; (2017); p. 4200 – 4204;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Electric Literature of 68797-61-5, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.68797-61-5, name is 5-Bromo-4,6-dichloropyrimidine, molecular formula is C4HBrCl2N2, molecular weight is 227.87, as common compound, the synthetic route is as follows.

Step 1: Synthesis of 4,5,6-triphenylpyrimidine (abbreviation: Htppm))First, into a recovery flask equipped with a reflux pipe were put 4.25 g of 5-bromo-4,6-dichloropyrimidine, 6.84 g of phenylboronic acid, 5.95 g of sodium carbonate, 0.16 g of bis(triphenylphosphine)palladium(II)dichloride (abbreviation: Pd(PPh3)2Cl2), 20 mL of water, and 20 mL of acetonitrile, and the air in the flask was replaced with argon. This reaction container was heated by irradiation with microwaves (2.45 GHz, 100 W) for 60 minutes. Here, into the flask were further put 2.28 g of phenylboronic acid, 1.98 g of sodium carbonate, 0.053 g of Pd(PPh3)2Cl2, 5 mL of water, and 5 mL of acetonitrile, and the mixture was heated again by irradiation with microwaves (2.45 GHz, 100 W) for 60 minutes. After that, the precipitated solid was suction-filtered and washed with water. The obtained residue was purified by flash column chromatography using dichloromethane and ethyl acetate as a developing solvent in a ratio of 10:1, so that a pyrimidine derivative Htppm, which was the objective substance, was obtained (white powder, yield of 46 %). Note that the irradiation with microwaves was performed using a microwave synthesis system (Discover, manufactured by CEM Corporation). A synthesis scheme (1-1) of Step 1 is shown below.

Statistics shows that 68797-61-5 is playing an increasingly important role. we look forward to future research findings about 5-Bromo-4,6-dichloropyrimidine.

Reference:
Patent; SEMICONDUCTOR ENERGY LABORATORY CO., LTD.; INOUE, Hideko; YAMAGUCHI, Tomoya; SHITAGAKI, Satoko; USHIKUBO, Takahiro; SEO, Satoshi; YAMADA, Yui; NOWATARI, Hiromi; WO2012/53627; (2012); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1436686-17-7, name is Ethyl 5-bromopyrazolo[1,5-a]pyrimidine-3-carboxylate. This compound has unique chemical properties. The synthetic route is as follows. Recommanded Product: Ethyl 5-bromopyrazolo[1,5-a]pyrimidine-3-carboxylate

General procedure: To a solution of 2.8 g (1 1 mmol) compound 1 -11 hydrogen chloride salt and 2.9 g (1 1 mmol) of compound 2 in 50 imL of EtOH was added 4.35 g (43.1 mmol) of EtaN. The mixture was stirred at 90 C for 2 h under nitrogen atmosphere and cooled to rt. It was concentrated under reduced pressure to afford a residue, which was purified by chromatography on silica gel column eluting with 20 % of ethyl acetate in petroleum ether to afford compound 1 -12. LC- MS: m/e = 416 [M+H]+.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 1436686-17-7, Ethyl 5-bromopyrazolo[1,5-a]pyrimidine-3-carboxylate.

Reference:
Patent; ANGEX PHARMACEUTICAL, INC.; WU, Wen-Lian; YANG, Zhiqiang; LEE, Francis; TAN, John Qiang; (112 pag.)WO2019/94143; (2019); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Electric Literature of 767-15-7, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 767-15-7, name is 2-Amino-4,6-dimethylpyrimidine. A new synthetic method of this compound is introduced below.

General procedure: For the synthesis of 2, the solution of sulfurisocyanatidic chloride (7.2mmol) in 20mL toluene was added to the solution of 1 (6.0mmol) in 20mL toluene dropwise at room temperature. The reactant was heated to 140C and then the reaction proceeded for 18h under reflux. Subsequently, the mixture was cooled down to room temperature and remaining sulfurisocyanatidic chloride was removed under reduced pressure, together with the solvent. Without further purification, the resulting yellow oil 2 was dissolved in 10mL anhydrous acetonitrile and after that it was added slowly to 5mmol of 3, which was also dissolved in 10mL anhydrous acetonitrile beforehead in ice bath. After stirring for 24hat room temperature, acetonitrile was removed under reduced pressure and saturated sodium bicarbonate was added to product 4. Product 5 precipitated easily and it was further purified by recrystallization from petroleum ether/acetone in 1:1 ratio in high yields. 15% hydrochloric acid was added to aqueous solution of 5 under stirring and corresponding acidified product 4 precipitated out easily in high yields.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,767-15-7, 2-Amino-4,6-dimethylpyrimidine, and friends who are interested can also refer to it.

Reference:
Article; Wu, Ren-Jun; Ren, Tongtong; Gao, Jie-Yu; Wang, Li; Yu, Qilin; Yao, Zheng; Song, Guo-Qing; Ruan, Wei-Bin; Niu, Cong-Wei; Song, Fu-Hang; Zhang, Li-Xin; Li, Mingchun; Wang, Jian-Guo; European Journal of Medicinal Chemistry; vol. 162; (2019); p. 348 – 363;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Electric Literature of 10397-13-4, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 10397-13-4, name is 4-(4,6-Dichloropyrimidin-2-yl)morpholine. A new synthetic method of this compound is introduced below.

4-(4,6-dichloropyrimidin-2-yl)morpholine (lOOmg 0.43mmol), pyridine-3-boronic acid (49mg, 0.4mmol), Cs2C03 ( 280mg, 0.86mmol) and Pd(PPh3)2Cl2 (20mg, 0.025mmol) were combined in dioxane (3ml) and water (1ml). The reaction mixture was then heated by microwave at 120C for 20min. Without purification (4-(3-cyclopropylureido)phenyl)boronic acid pinacol ester (130mg, 0.43mmol), Cs2C03 ( 280mg, 0.86mmol) and Pd(PPh3)2Cl2 (20mg, 0.025mmol) were added and the reaction mixture was then heated by microwave at 120C for a further 20min. The reaction mixture was partitioned between EtOAc and water. The organic layer was passed through a PTFE hydrophobic frit and the solvent removed in vacuo. Residual solid was triturated to give crude produect which was further purifed by prep LC/MS (low pH) to yield (9mg, 5%). 1H NMR (dg-DMSO) 9.45 (s, 1H), 8.72 (d, 1H), 8.65 (s, 1H), 8.61 (d, 1H), 8.22 (d, 2H), 7.87 (s, 1H), 7.58-7.55 (m, 3H), 6.51 (br s, 1H), 3.93-3.86 (m, 4H) 3.76-3.71 (m, 4H), 2.58-2.52 (m, 1H), 0.67-0.62 (m, 2H), 0.44-0.40 (m, 2H);LCMS (method B), (M+H+) 417, Rt = 2.24min.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,10397-13-4, 4-(4,6-Dichloropyrimidin-2-yl)morpholine, and friends who are interested can also refer to it.

Reference:
Patent; CELLZOME LIMITED; LYNCH, Rosemary; CANSFIELD, Andrew, David; NIBLOCK, Helen, Sarah; HARDY, Daniel, Paul; TAYLOR, Jessica; WO2011/107585; (2011); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Reference of 40805-79-6, The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 40805-79-6, name is 5-Pyrimidinecarbonitrile. This compound has unique chemical properties. The synthetic route is as follows.

In a 250 mL round-bottomed flask, pyrimidine-5-carbonitrile (1.5 g, 14.3 mmol), pyridine (0.339 g, 0.35 ml, 28.5 mmol), and 2-mercaptopropionic acid (1.51 g, 14.3 mmol) were combined to give a light yellow solution. The reaction mixture was heated to 100 C. and stirred for 2 h. Upon cooling, the thick yellow mixture was diluted with 100 mL ethanol and stirred for 30 min. The slurry was then filtered, and washed with diethyl ether (2*100 mL) to give 5-Methyl-2-(pyrimidin-2-yl)-thiazol-4-ol (2.33 g, 85%) as yellow solid which was used directly without further purification.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 40805-79-6, 5-Pyrimidinecarbonitrile.

Reference:
Patent; Alam, Muzaffar; Du Bois, Daisy Joe; Hawley, Ronald Charles; Kennedy-Smith, Joshua; Minatti, Ana Elena; Palmer, Wylie Solang; Silva, Tania; Wilhelm, Robert Stephen; US2011/71150; (2011); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia