Category: 22536-61-4

Related Products of 22536-61-4, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.22536-61-4, name is 2-Chloro-5-methylpyrimidine, molecular formula is C5H5ClN2, molecular weight is 128.56, as common compound, the synthetic route is as follows.

Step 1 : To a solution of compound 184 (10.0 g, 77.79 mmol) in IMS (100 ml.) was added aqueous ammonia (35percent, 100 ml). The reaction mixture was transferred to a sealed bomb and heated at 200 °C for 4 h. The reaction mixture was allowed to cool to room temperature and was concentrated to remove most of the solvent and water (25 ml.) added. The solid obtained was filtered and dried under vacuum to give the desired compound 185 as off-white solid (7.85 g, 92percent yield).1H NMR (400 MHz, DMSO-d6) delta 8.06 (s, 2H), 6.30 (s, 2H), 2.03 (s, 3H). LCMS m/z 1 10 [M+H]+.

Statistics shows that 22536-61-4 is playing an increasingly important role. we look forward to future research findings about 2-Chloro-5-methylpyrimidine.

Reference:
Patent; PFIZER INC.; BAILEY, Simon; BURKE, Benjamin, Joseph; COLLINS, Michael, Raymond; CUI, Jingrong, Jean; DEAL, Judith, Gail; HOFFMAN, Robert, Louis; HUANG, Qinhua; JOHNSON, Ted, William; KANIA, Robert, Steven; KATH, John, Charles; LE, Phuong, Thi, Quy; MCTIGUE, Michele, Ann; PALMER, Cynthia, Louise; RICHARDSON, Paul, Francis; SACH, Neal, William; WO2013/132376; (2013); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Adding a certain compound to certain chemical reactions, such as: 22536-61-4, 2-Chloro-5-methylpyrimidine, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Product Details of 22536-61-4, blongs to pyrimidines compound. Product Details of 22536-61-4

A 3-necked 3 L RBF was fitted with a reflux condenser, a temperature controller and a septum and was charged with 2-chloro-5-methylpyrimidine (81 mL, 778 mmol), potassium vinyltrifluoroborate (156 g, 1167 mmol), triphenylphosphine (18.02 mL, 78 mmol), and cesium carbonate (156 mL, 1945 mmol). Water (1565 mL) was added, and the mixture was stirred for 2 min and then THF (244 mL) was added. Argon was sparged through the mixture for 5 min and then palladium (II) chloride (1.72 g, 38.9 mmol) was added. The reaction was further sparged with argon for 5 min. The temperature was raised to 62 °C and stirring was continued until completion. The reaction was cooled to RTand filtered through two Whatman GF/F filter cups, rinsing with diethyl ether. The mixture was transfered to a separatory funnel and the layers were separated. The aqueous layer was further extracted with diethyl ether (4X). The combined organic layers were dried over anhydrous magnesium sulfate and partially concentrated in vacuo at 20 °C and 115 torr for an extended period of time to give an orange liquid. The initial product was purified by Kugelrohr distillation to provide 405.01 (65.4 g, 70percent yield) as a light yellow oil. LCMS- ESI (pos.) m/z: 121.1 (M+H)+.

The synthetic route of 22536-61-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; AMGEN INC.; CHEN, Ning; CHEN, Xiaoqi; CHEN, Yinhong; CHENG, Alan C.; CONNORS, Richard V.; DEIGNAN, Jeffrey; DRANSFIELD, Paul John; DU, Xiaohui; FU, Zice; HARVEY, James S.; HEATH, Julie Anne; HEUMANN, Lars V.; HORNE, Daniel B.; HOUZE, Jonathan; KALLER, Matthew R.; KAYSER, Frank; KHAKOO, Aarif Yusuf; KOPECKY, David J.; LAI, Su-Jen; MA, Zhihua; MEDINA, Julio C.; MIHALIC, Jeffrey T.; NISHIMURA, Nobuko; OLSON, Steven H.; PATTAROPONG, Vatee; SWAMINATH, Gayathri; WANG, Xiaodong; WANSKA, Malgorzata; YANG, Kevin; YEH, Wen-Chen; (700 pag.)WO2018/97945; (2018); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Application of 22536-61-4, Adding some certain compound to certain chemical reactions, such as: 22536-61-4, name is 2-Chloro-5-methylpyrimidine,molecular formula is C5H5ClN2, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 22536-61-4.

A solution of the compound (556 mg, 1.0 mmol) obtained in Example 16-5), 2-chloro-5-methylpyrimidine (193 mg, 1.5 mmol), tetrakis(triphenylphosphine)palladium(0) (231 mg, 0.2 mmol), and potassium carbonate (276 mg, 2 mmol) in dimethoxyethane (4 mL) and water (1 mL) was stirred at 130°C for 1.5 h under microwave irradiation. The reaction mixture was cooled to room temperature, saturated aqueous sodium hydrogencarbonate was added to the reaction mixture, the mixture was extracted with dichloromethane, and the organic layer was washed with saturated sodium chloride solution and dried with anhydrous sodium sulfate. After filtration, the filtrate was concentrated under reduced pressure, and the residue was purified by silica gel chromatography (Isco Combiflash, 40 g, methanol:ethyl acetate = 0:100 to 20:80, gradient) to obtain the title compound (298 mg, 57percent) as a brown oily substance. 1H-NMR (400 MHz, CDCl3) delta: 0.05 (3H, s), 0.07 (3H, s), 0.91 (9H, s), 1.19 (3H, s), 1.49-1.52 (2H, m), 1.58-1.67 (2H, m), 2.34 (3H, s), 2.50 (1H, ddd, J = 15.6, 8.0, 2.2 Hz), 2.63 (1H, ddd, J = 15.6, 7.7, 2.2 Hz), 3.40 (2H, s), 3.50 (1H, d, J = 10.2 Hz), 3.54 (1H, d, J = 10.2 Hz), 4.06 (1H, ddd, J = 14.6, 8.0, 2.2 Hz), 4.31 (1H, ddd, J = 14.6, 7.7, 2.2 Hz), 7.17 (2H, dt, J = 8.7, 2.0 Hz), 8.32 (2H, dt, J = 8.7, 2.0 Hz), 8.62 (2H, s)

According to the analysis of related databases, 22536-61-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Daiichi Sankyo Company, Limited; MORI, Makoto; FUJII, Kunihiko; INUI, Masaharu; BABA, Takayuki; ONISHI, Yukari; AOYAGI, Atsushi; EP2700643; (2014); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Synthetic Route of 22536-61-4, Adding some certain compound to certain chemical reactions, such as: 22536-61-4, name is 2-Chloro-5-methylpyrimidine,molecular formula is C5H5ClN2, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 22536-61-4.

[0397j 5-methyl-2-vinylpyrimidine, Example 11.01. A 3 L 3-necked round bottomed flask was fitted with a reflux condenser, a temperature controller and a septum and was charged with 2-chloro-5-methylpyrimidine (81 mL, 778 mmol), potassium vinyltrifluoroborate (156 g, 1167 mmol), triphenylphosphine (18.02 mL, 78 mmol), cesium carbonate (156 mL, 1945 mmol) and a large stir bar. Water (1565 mL) was added and the mixture was stirred for several minutes and then THF (244 mL) was added. Argon was bubbled through the mixture for 5 mm and then added palladium (II) chloride (1.72 g, 38.9 mmol) was added. The reaction was further sparged with argon for 5 mins. The temperature was raised to 62 C and stirring continued to completion. The reaction was then cooled to RT and filtered through two Whatman GF/F filter cups, rinsing with ether. The mixture was transferred to a separatory funnel, and the the layers were separated. The aqueous layer was further extracted with diethyl ether (4 x 200 mL). The organic layers were combined and dried over anydrous MgSO4 and then filtered. The mixture was partially concentrated on the roto evaporator at 20 C and 115 torr for an extended period of time to give an orange liquid. The material was further purified by Kugelrohr distillation to isolate the title compound (65.4 g, 70%) as a light yellow oil. ?HNMR(400MHz, CDC13)E2.31 (s, 3H), 5.68 (d,J10.56Hz, 1H), 6.55 (d,J17.22Hz, 1H), 6.86 (dd, J=17.41, 10.56 Hz, 1H), 8.54 (s, 2H). LCMS-ESI (pos.) mlz: 121.1 (M+H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 22536-61-4, 2-Chloro-5-methylpyrimidine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; AMGEN INC.; CHEN, Ning; CHEN, Xiaoqi; CHEN, Yinhong; CHENG, Alan C.; CONNORS, Richard V.; DEIGNAN, Jeffrey; DRANSFIELD, Paul John; DU, Xiaohui; FU, Zice; HEATH, Julie Anne; HORNE, Daniel B.; HOUZE, Jonathan; KALLER, Matthew R.; KHAKOO, Aarif Yusuf; KOPECKY, David John; LAI, Su-Jen; MA, Zhihua; MCGEE, Lawrence R.; MEDINA, Julio C.; MIHALIC, Jeffrey T.; NISHIMURA, Nobuko; OLSON, Steven H.; PATTAROPONG, Vatee; SWAMINATH, Gayathri; WANG, Xiaodong; YANG, Kevin; YEH, Wen-Chen; DEBENEDETTO, Mikkel V.; FARRELL, Robert P.; HEDLEY, Simon J.; JUDD, Ted C.; KAYSER, Frank; (1266 pag.)WO2016/187308; (2016); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Synthetic Route of 22536-61-4, In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 22536-61-4 as follows.

A 3 L 3-necked round bottom flask was fitted with a reflux condenser, a temperature controller and a septum and was charged with 2-chloro-5-methylpyrimidine (81 mL, 778 mmol), potassium vinyltrifluoroborate (156g, 1167 mmol), triphenylphosphine (18.02 mL, 78 mmol), cesium carbonate (156 mL, 1945 mmol) and a large stir bar. Water (1565 mL) was addedand the mixture was stirred for several mm and then THF (244 mL) was added. Argon was bubbled through the mixture for 5 mm and then palladium (II) chloride (1.72 g, 38.9 mmol) was added. The reaction was further sparged with argon for 5 mins. The temperature was raised to 62 °C and stirring was continued to completion. The reaction was then cooled to RT and filtered through two Whatman GF/F filter cups, rinsing with ether. The mixture was transferred to a separatory funnel, and the layers were separated. The aqueous layer was further extracted with diethyl ether (4 x 200 mL). The organic layers were combined and dried over anhydrous MgSO4 and then filtered. The mixture was partially concentrated on the rotory evaporator at 20 °C and 115 torr for an extended period of time to give an orange liquid. The material was further purified by Kugelrohr distillation to isolate the title compound (65.4g, 70percent) as a light yellow oil. 1H NMR (400 MHz, CDC13) oe 2.31 (s, 3H), 5.68 (d,J10.56 Hz, 1H), 6.55 (d,J17.22 Hz, 1H), 6.86 (dd,J17.41, 10.56 Hz, 1H), 8.54 (s, 2H). LCMS-ESI (pos.)m/z:121.1 (M+H)t

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,22536-61-4, its application will become more common.

Reference:
Patent; AMGEN INC.; CHEN, Yinhong; DRANSFIELD, Paul John; HARVEY, James S.; HEATH, Julie Anne; HOUZE, Jonathan; KHAKOO, Aarif Yusuf; KOPECKY, David J.; LAI, Su-Jen; MA, Zhihua; NISHIMURA, Nobuko; PATTAROPONG, Vatee; SWAMINATH, Gayathri; YEH, Wen-Chen; RAMSDEN, Philip Dean; (434 pag.)WO2018/93577; (2018); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Application of 22536-61-4, Adding some certain compound to certain chemical reactions, such as: 22536-61-4, name is 2-Chloro-5-methylpyrimidine,molecular formula is C5H5ClN2, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 22536-61-4.

2-Chloro-5-methyl-pyrimidine (18 mL, 151 mmol), potassium (Z)-but-2-en-2- yltrifluoroborate (Sigma Aldrich, 31 g, 191 mmol), tricyclohexyiphosphine (8.5 g, 30.2 mmol), and Pd2(dba)3 (13.82 g, 15.09 mmol) were added to a flask which was then degassed and backfilled with nitrogen. To the flask was added 1 ,4-dioxane (252 mL) and aqueous potassium phosphate tribasic (37.5 mL, 453 mmol). The resulting reaction was heated at 100C for 16 h. The reaction was then cooled to RT. The residue was filtered through a plug of silica gel and then loaded onto silica gel (0-20% EtOAc in heptanes) to afford (E)-2-(but-2-en-2-yl)-5-methylpyrimidine, Example 371.01 (19 g, 125 mmol), in 83% yield.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 22536-61-4, 2-Chloro-5-methylpyrimidine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; AMGEN INC.; BROWN, Matthew; CHEN, Ning; CHEN, Xiaoqi; CHEN, Yinhong; CHENG, Alan C.; CONNORS, Richard V.; DEIGNAN, Jeffrey; DRANSFIELD, Paul John; DU, Xiaohui; FU, Zice; HARVEY, James S.; HEATH, Julie Anne; HEUMANN, Lars V.; HOUZE, Jonathan; KAYSER, Frank; KHAKOO, Aarif Yusuf; KOPECKY, David J.; LAI, Su-Jen; MA, Zhihua; MEDINA, Julio C.; MIHALIC, Jeffrey T.; OLSON, Steven H.; PATTAROPONG, Vatee; SWAMINATH, Gayathri; WANG, Xiaodong; WANSKA, Malgorzata; YEH, Wen-Chen; (815 pag.)WO2018/97944; (2018); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Synthetic Route of 22536-61-4, The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 22536-61-4, name is 2-Chloro-5-methylpyrimidine. This compound has unique chemical properties. The synthetic route is as follows.

[000121] To a stirring solution of 2-chloro-5-methylpyrimidine 80 (5 g, 38.89 mmol) in CC (250 mL) under inert atmosphere were added N-bromosuccinimide (6.92 g, 38.89 mmol) and benzoyl peroxide (706 mg, 2.91 mmol) at RT; heated to 85 °C and stirred for 16 h. The reaction was monitored by TLC; after completion of the reaction, the reaction mixture was filtered. The filtrate was concentrated in vacuo to obtain the crude. The crude was purified through silica gel flash column chromatography using 7percent EtOAc/ hexanes to afford crude compound 81 (5 g, mixture of SM and product in the ratio of ~1: 1) as pale yellow solid. TLC: 20percent EtOAc/ hexanes (R/. 0.5); LC-MS: 55.30percent; 208.8 (M++l); (column; Ascentis Express C18, (50 chi 3.0 mm, 2.7 muiotaeta); RT 1.79 min. 0.025percent Aq. TFA + 5percent ACN: ACN + 5percent 0.025percent Aq. TFA, 1.2 mL/min);

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 22536-61-4, 2-Chloro-5-methylpyrimidine.

Reference:
Patent; ASSEMBLY BIOSCIENCES, INC.; INDIANA UNIVERSITY RESEARCH AND TECHNOLOGY CORPORATION; TURNER, William; ARNOLD, Lee, Daniel; MAAG, Hans; BURES, Mark; (99 pag.)WO2017/48954; (2017); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Adding a certain compound to certain chemical reactions, such as: 22536-61-4, 2-Chloro-5-methylpyrimidine, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Safety of 2-Chloro-5-methylpyrimidine, blongs to pyrimidines compound. Safety of 2-Chloro-5-methylpyrimidine

[0613] Synthesis of methyl 5-methylpyrimidine-2-carboxylate: Me [0614] To a stirred solution of 2-chloro-5-methylpyrimidine (200 mg, 1.55 mmol) in MeOH: CH3CN (4: 1, 10 mL) under argon atmosphere were added Pd(dppf)Cl2 (227 mg, 0.31 mmol) and triethyl amine (0.45 mL, 3.11 mmol) at RT; heated to 100 C and stirred for 16 h in steel bomb under CO pressure. The reaction was monitored by TLC; after completion of the reaction, the reaction mixture was filtered through celite and the filtrate was concentrated in vacuo to obtain the crude. The crude was purified through silica gel column chromatography using 60% EtOAc/ Hexanes to afford 5-methylpyrimidine-2-carboxylate (146 mg, 62%) as brick red solid. [0615] 1H-NMR (CDCls, 400 MHz): delta 8.74 (s, 2H), 4.08 (s, 3H), 2.42 (s, 3H); LC-MS: 81.73%; 153 (M++l); (column: X Bridge C-18, 50 3.0 mm, 3.5 mupiiota); RT 2.10 min. 0.05% Aq TFA: ACN; 0.8 mL/min); TLC: 70% EtOAc/ Hexanes (R 0.2)

The synthetic route of 22536-61-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ENVIVO PHARMACEUTICALS, INC.; RIPKA, Amy; SHAPIRO, Gideon; MCRINER, Andrew, J.; BURSAVICH, Matthew, Gregory; WO2013/142269; (2013); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Reference of 22536-61-4, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.22536-61-4, name is 2-Chloro-5-methylpyrimidine, molecular formula is C5H5ClN2, molecular weight is 128.56, as common compound, the synthetic route is as follows.

To a solution of 2-chloro-5-methyl-pyrimidine (500.00 mg, 3.89 mmol, 1.00 eq) in MeOH (10.00 mL) and DMF (2.00mL) was added triethylamine (1.18 g, 11.67 mmol, 1.62 mL, 3.00 eq) and Pd(dppf)C12 (426.87 mg, 583.39 umol, 0.15 eq) under CO. The suspension was degassed and purged with CO several times. The mixture was stirred under CO (3 Mpa) at 120C for 16 h. The reaction mixture was filtered and the filtrate was concentrated. The crude residue was purified by column chromatography (Petroleum ether : Ethyl acetate=20: l to 0: 1) to afford methyl 5-methylpyrimidine-2-carboxylate (350.00 mg). LCMS (M+H+) m/z: 153.

Statistics shows that 22536-61-4 is playing an increasingly important role. we look forward to future research findings about 2-Chloro-5-methylpyrimidine.

Reference:
Patent; CONSTELLATION PHARMACEUTICALS, INC.; ALBRECHT, Brian, K.; AUDIA, James, Edmund; COTE, Alexandre; DUPLESSIS, Martin; GEHLING, Victor, S.; HARMANGE, Jean-christophe; VASWANI, Rishi, G.; (274 pag.)WO2016/172496; (2016); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Adding a certain compound to certain chemical reactions, such as: 22536-61-4, 2-Chloro-5-methylpyrimidine, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, 22536-61-4, blongs to pyrimidines compound. HPLC of Formula: C5H5ClN2

A solution of 2-chloro-5-methylpyrimidine (500 g, 3889 mmol, 1.0 equiv) in DMF (5000 mL) was degassed with N2 for 20 mm and then dppf (108 g, 194 mmol, 0.05 equiv) and Pd2(dba)3 (178 g, 194 mmol, 0.05 equiv) were added to the reaction mixture. Zn(CN)2 (685 g, 5834 mmol, 1.5 equiv) was added, and the reaction mixture was heated at 100 C for 16 h. The reaction was quenched with water (5 L) and stirred for 10 mm. The reaction mixture was filtered through Celite brand filter aid pad. The filtrate was diluted with water (4 L) and extracted with EtOAc (2 x 4 L). The combined organic layers were washed with brine (4 L), dried over Na2SO4, filtered, and concentrated in vacuo to give the initial productwhich was further purified by column chromatography using silica gel (60-120 mesh) and0-10 % EtOAc in hexane to obtain Example 374.01 (330 g, 71 %) as an off white solid.1H NMR (400 MHz, DMSO-d6) oe 8.89 (s, 2H), 2.39 (s, 3H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,22536-61-4, its application will become more common.

Reference:
Patent; AMGEN INC.; BROWN, Matthew; CHEN, Ning; CHEN, Xiaoqi; CHEN, Yinhong; CHENG, Alan C.; CONNORS, Richard V.; DEIGNAN, Jeffrey; DRANSFIELD, Paul John; DU, Xiaohui; FU, Zice; HARVEY, James S.; HEATH, Julie Anne; HEUMANN, Lars V.; HOUZE, Jonathan; KAYSER, Frank; KHAKOO, Aarif Yusuf; KOPECKY, David J.; LAI, Su-Jen; MA, Zhihua; MEDINA, Julio C.; MIHALIC, Jeffrey T.; OLSON, Steven H.; PATTAROPONG, Vatee; SWAMINATH, Gayathri; WANG, Xiaodong; WANSKA, Malgorzata; YEH, Wen-Chen; (815 pag.)WO2018/97944; (2018); A1;,
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia