Category: 591-12-8

In organic chemistry, atoms other than carbon and hydrogen are generally referred to as heteroatoms. The most common heteroatoms are nitrogen, oxygen and sulfur. Now I present to you an article called Catalytic co-pyrolysis of seaweeds and cellulose using mixed ZSM-5 and MCM-41 for enhanced crude bio-oil production, published in 2021-01-31, which mentions a compound: 591-12-8, mainly applied to Enteromorpha clathrata cellulose zeolite catalytic pyrolysis bio oil, HPLC of Formula: 591-12-8.

Catalytic co-pyrolysis of seaweed Enteromorpha clathrata (EN) and cellulose (CEL) with catalysts ZSM-5 and MCM-41 was investigated by TG, Py-GC/MS and fixed-bed experiments The effects of temperature, catalysts, seaweed and cellulose ratio were examined on product yields distribution and bio-oil compositions by catalytic co-pyrolysis. The maximum bio-oil yield was recorded at the ratio of 1:1 (EN and CEL) with ZSM-5/MCM-41 at 500°C on co-pyrolytic process. The interaction of radicals and faster heat transfer rate of EN/CEL induces the synergistic effects with catalysts. The advantage of mesoporous mol. sieve along with acidic microporous zeolite of ZSM-5/MCM-41 improved the cracking, dehydration, decarbonylation, decarboxylation, dealkylation, aromatization, oligomerization and deamination reactions. The overall study revealed that the amount of N-containing compounds were decreased and significantly elevated bio-oil production with increased furans and aromatics

After consulting a lot of data, we found that this compound(591-12-8)HPLC of Formula: 591-12-8 can be used in many types of reactions. And in most cases, this compound has more advantages.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Most of the compounds have physiologically active properties, and their biological properties are often attributed to the heteroatoms contained in their molecules, and most of these heteroatoms also appear in cyclic structures. A Journal, Asian Journal of Chemistry called Study on the effect of dual solvent proportions on composition of Rosa x damascena concrete oil obtained using soxhlet extraction method, Author is Sofiya, K.; Kumar, G. Bharath, which mentions a compound: 591-12-8, SMILESS is O=C1OC(C)=CC1, Molecular C5H6O2, Synthetic Route of C5H6O2.

Concrete oil was extracted from Rosa x damascena using different percentage ratios of solvents (petroleum ether and ethanol) by the Soxhlet extraction method. The extraction was carried out using petroleum ether and ethanol in five different percentage ratios of (volume/volume) (100:0, 75:25, 50:50, 25:75, 0:100) (petroleum ether:ethanol). The rotary vacuum evaporator was used to sep. concrete oil and the solvents. The extracted concrete oil was analyzed using gas chromatog.-mass spectrometry (GC-MS) technique. The obtained results show that many new compounds were identified, at two different solvents and its ratios. Phenylethyl alc. in the percentages of (61.71%), (10.07%) and (25.92%) was obtained as a major compound with the solvent percentages of (100:0), (50:50) and (75:25) (PE:E), resp. Hexacosane (37.2%) was identified as a major compound when pure ethanol is used as a solvent. The highest number of components were identified (totally 93 components) when an equal percentage (50:50) of petroleum ether and ethanol were mixed. The usual monoterpenes components, e.g. geraniol, nerol, citronellol and linalool, were not found in the present extraction study. This study concludes that the compositions of concrete oil were mainly influenced by the type of solvents and its ratios used for the extraction

After consulting a lot of data, we found that this compound(591-12-8)Synthetic Route of C5H6O2 can be used in many types of reactions. And in most cases, this compound has more advantages.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Most of the compounds have physiologically active properties, and their biological properties are often attributed to the heteroatoms contained in their molecules, and most of these heteroatoms also appear in cyclic structures. A Journal, Article, Food Chemistry called Antimicrobial properties and volatile profile of bread and biscuits melanoidins, Author is Diaz-Morales, Noelia; Ortega-Heras, Miriam; Diez-Mate, Ana M.; Gonzalez-SanJose, Maria L.; Muniz, Pilar, which mentions a compound: 591-12-8, SMILESS is O=C1OC(C)=CC1, Molecular C5H6O2, Formula: C5H6O2.

This work gives novel information about the antimicrobial effect and volatiles of melanoidins isolated from Maria biscuit, common and soft bread. Melanoidins were isolated from scraped and sieved crusts (1 mm), after gluten digestion, 10 kDa ultrafiltration, and diafiltration. Finally, they were freeze-dried. Headspace solid-phase dynamic extraction coupled with a gas chromatograph with a mass spectrometer was used to determine the volatile profiles. The antimicrobial effect was evaluated against isolated strains of the most relevant food spoilage and pathogen microorganisms, together with some molds and yeasts. Melanoidins from common bread exhibited the most extensive antimicrobial activities and showed the most composite volatile profile. No undesirable compounds, such as furfural and 5-hydroxy-methyl-furfural, were found in any of the melanoidins studied. The obtained data pointed out that bakery melanoidins can exert effective food technol. properties as natural antimicrobials that can improve shelf-life and security of foodstuffs, together with a possible contribution to food aroma.

After consulting a lot of data, we found that this compound(591-12-8)Formula: C5H6O2 can be used in many types of reactions. And in most cases, this compound has more advantages.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Epoxy compounds usually have stronger nucleophilic ability, because the alkyl group on the oxygen atom makes the bond angle smaller, which makes the lone pair of electrons react more dissimilarly with the electron-deficient system. Compound: 5-Methylfuran-2(3H)-one, is researched, Molecular C5H6O2, CAS is 591-12-8, about Conversion of levulinic acid using CuO/WO3(x)-Al2O3 catalysts.Safety of 5-Methylfuran-2(3H)-one.

The CuO/WO3(x)-Al2O3 catalysts were tested for the conversion of levulinic acid into chems. of high added-value compounds The WO3(x)-Al2O3 modified supports with 5 different WO3 contents (2, 4, 6, 8, and 10 wt%) were prepared by the wet impregnation method, consequently 5 wt% CuO was impregnated on the modified supports. The optimum catalytic activity was obtained with CuO/WO3(6%)-Al2O3 catalyst, which was directly related to the highest acidity of the catalyst showed by NH3-TPD and acid strength by titration anal. The distribution of products observed on CuO/WO3(x)-Al2O3, was correlated with a change in acid site type and acid strength. The changes in the acidity by the addition of CuO over modified support was attributed to structural changes (distortions) stabilizing the active phase. This distortion is increasing the acidity strength, and favoring a higher catalytic activity with changes in the selectivity in function of CuO content over WO3(x)-Al2O3 modified support, obtaining the maximum formation of 2-MTHF and possibly other higher value-added chems. from GVL such as: 1,4-pentanediol, pentenoic acid, pentanoic acid, 2-pentanol, and gaseous products were on CuO/WO3(6%)-Al2O3 catalyst.

After consulting a lot of data, we found that this compound(591-12-8)Safety of 5-Methylfuran-2(3H)-one can be used in many types of reactions. And in most cases, this compound has more advantages.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Safety of 5-Methylfuran-2(3H)-one. The mechanism of aromatic electrophilic substitution of aromatic heterocycles is consistent with that of benzene. Compound: 5-Methylfuran-2(3H)-one, is researched, Molecular C5H6O2, CAS is 591-12-8, about Photochemistry of 2-butenedial and 4-oxo-2-pentenal under atmospheric boundary layer conditions. Author is Newland, Mike J.; Rea, Gerard J.; Thuner, Lars P.; Henderson, Alistair P.; Golding, Bernard T.; Rickard, Andrew R.; Barnes, Ian; Wenger, John.

Unsaturated 1,4-dicarbonyl compounds, such as 2-butenedial and 4-oxo-2-pentenal are produced in the atm. boundary layer from the oxidation of aromatic compounds and furans. These species are expected to undergo rapid photochem. processing, affecting atm. composition In this study, the photochem. of (E)-2-butenedial and both E and Z isomers of 4-oxo-2-pentenal was investigated under natural sunlight conditions at the large outdoor atm. simulation chamber EUPHORE. Photochem. loss rates, relative to j(NO2), are determined to be j((E)-2-butenedial)/j(NO2) = 0.14 (±0.02), j((E)-4-oxo-2-pentenal)/j(NO2) = 0.18 (±0.01), and j((Z)-4-oxo-2-pentenal)/j(NO2) = 0.20 (±0.03). The major products detected for both species are a furanone (30-42%) and, for (E)-2-butenedial, maleic anhydride (2,5-furandione) (12-14%). The mechanism appears to proceed predominantly via photoisomerization to a ketene-enol species following γ-H abstraction. The lifetimes of the ketene-enol species in the dark from 2-butenedial and 4-oxo-2-pentenal are determined to be 465 s and 235 s, resp. The ketene-enol can undergo ring closure to yield the corresponding furanone, or further unimol. rearrangement which can subsequently form maleic anhydride. A minor channel (10-15%) also appears to form CO directly. This is presumed to be via a mol. elimination route of an initial biradical intermediate formed in photolysis, with an unsaturated carbonyl (detected here but not quantified) as co-product. α-Dicarbonyl and radical yields are very low, which has implications for ozone production from the photo-oxidation of unsaturated 1,4-dicarbonyls in the boundary layer. Photochem. removal is determined to be the major loss process for these species in the boundary layer with lifetimes of the order of 10-15 min, compared to >3 h for reaction with OH.

After consulting a lot of data, we found that this compound(591-12-8)Safety of 5-Methylfuran-2(3H)-one can be used in many types of reactions. And in most cases, this compound has more advantages.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Formula: C5H6O2. The mechanism of aromatic electrophilic substitution of aromatic heterocycles is consistent with that of benzene. Compound: 5-Methylfuran-2(3H)-one, is researched, Molecular C5H6O2, CAS is 591-12-8, about Scalable synthesis and polymerization of a β-angelica lactone derived monomer. Author is Dell’Acqua, Andrea; Stadler, Bernhard M.; Kirchhecker, Sarah; Tin, Sergey; de Vries, Johannes G..

Bio-based levulinic acid is easily ring-closed to α-angelica lactone (α-AL). The α-AL can be isomerized to the conjugated β-AL under the influence of base, but since this is an equilibrium mixture it is very hard to devise a scalable process that would give pure β-AL. This problem was circumvented by distilling the equilibrium mixture to obtain a 90 : 10 mixture of β- and α-AL in 88% yield. This mixture was used for Diels-Alder reactions on 3 terpenes and on cyclopentadiene in up to 100 g scale. The latter DA adduct was subjected to a ROMP reaction catalyzed by the Grubbs II catalyst. The resulting polymer has some similarities to poly-norbornene but is more polar. The polymer can be processed into films with very good transparency.

After consulting a lot of data, we found that this compound(591-12-8)Formula: C5H6O2 can be used in many types of reactions. And in most cases, this compound has more advantages.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Electric Literature of C5H6O2. Aromatic compounds can be divided into two categories: single heterocycles and fused heterocycles. Compound: 5-Methylfuran-2(3H)-one, is researched, Molecular C5H6O2, CAS is 591-12-8, about One-pot direct conversion of levulinic acid into high-yield valeric acid over a highly stable bimetallic Nb-Cu/Zr-doped porous silica catalyst. Author is Karanwal, Neha; Verma, Deepak; Butolia, Paresh; Kim, Seung Min; Kim, Jaehoon.

The direct conversion of levulinic acid (LA) to valeric biofuel is highly promising for the development of biorefineries. Herein, LA is converted into valeric acid (VA) via one-pot direct cascade conversion over non-noble metal-based Nb-doped Cu on Zr-doped porous silica (Nb-Cu/ZPS). Under mild reaction conditions (150°C and 3.0 MPa H2 for 4 h), LA was completely converted into VA in high yield (99.8%) in aqueous medium with a high turnover frequency of 0.038 h-1. The Lewis acid sites of ZPS enhanced the adsorption of LA on the catalyst surface, and both the Lewis and Bronsted acidity associated with Nb2O5 and the metallic Cu0 sites promoted catalysis of the cascade hydrogenation, ring cyclization, ring-opening, and hydrogenation reactions to produce VA from LA. The bimetallic Nb-Cu/ZPS catalyst was also effective for the conversion of VA into various valeric esters in C1-C5 alc. media. The presence of Nb2O5 effectively suppressed metal leaching and coke formation, which are serious issues in the liquid-phase conversion of highly acidic LA during the reaction. The catalyst could be used for up to five consecutive cycles with marginal loss of activity, even without catalyst re-activation.

Although many compounds look similar to this compound(591-12-8)Electric Literature of C5H6O2, numerous studies have shown that this compound(SMILES:O=C1OC(C)=CC1), has unique advantages. If you want to know more about similar compounds, you can read my other articles.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

COA of Formula: C5H6O2. Aromatic heterocyclic compounds can also be classified according to the number of heteroatoms contained in the heterocycle: single heteroatom, two heteroatoms, three heteroatoms and four heteroatoms. Compound: 5-Methylfuran-2(3H)-one, is researched, Molecular C5H6O2, CAS is 591-12-8, about The β-carotene-oxygen copolymer: Its relationship to apocarotenoids and β-carotene function. Author is Mogg, Trevor J.; Burton, Graham W..

β-Carotene spontaneously copolymerizes with mol. oxygen to form a β-carotene-oxygen copolymer compound (“”copolymer””) as the main product, together with small amounts of many apocarotenoids. Both the addition and scission products are interpreted as being formed during progression through successive free radical β-carotene-oxygen adduct intermediates. The product mixture from full oxidation of β-carotene, lacking both vitamin A and β-carotene, has immunol. activities, some of which are derived from the copolymer. However, the copolymer’s chem. makeup is unknown. A chem. breakdown study shows the compound to be moderately stable but nevertheless the latent source of many small apocarotenoids. GC-MS anal. with mass-spectral library matching identified a min. of 45 structures, while more than 90 others remain unassigned. Newly identified products include various small keto carboxylic acids and dicarboxylic acids, several of which are central metabolic intermediates. Also present are glyoxal and Me glyoxal dialdehydes, recently reported as β-carotene metabolites in plants. Although both compounds at higher concentrations are known to be toxic, at low concentration, Me glyoxal has been reported to be potentially capable of activating an immune response against microbial infection. In plants, advantage is taken of the electrophilic reactivity of specific apocarotenoids derived from β-carotene oxidation to activate protective defenses. Given that the copolymer occurs naturally and is a major product of non-enzymic β-carotene oxidation in stored plants, by partially sequestering apocarotenoid metabolites, the copolymer may serve to limit potential toxicity and maintain low cellular apocarotenoid concentrations for signaling purposes. In animals, the copolymer may serve as a systemic source of apocarotenoids.

Although many compounds look similar to this compound(591-12-8)COA of Formula: C5H6O2, numerous studies have shown that this compound(SMILES:O=C1OC(C)=CC1), has unique advantages. If you want to know more about similar compounds, you can read my other articles.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

Related Products of 591-12-8. Aromatic compounds can be divided into two categories: single heterocycles and fused heterocycles. Compound: 5-Methylfuran-2(3H)-one, is researched, Molecular C5H6O2, CAS is 591-12-8, about Butenolide Derivatives of Biobased Furans: Sustainable Synthetic Dyes. Author is Saska, Jan; Li, Zheng; Otsuki, Andrew L.; Wei, Jiahui; Fettinger, James C.; Mascal, Mark.

The dye and pigment manufacturing industry is one of the most polluting in the world. Each year, over one million tons of petrochem. colorants are produced globally, the synthesis of which generates a large amount of waste. Naturally occurring, plant-based dyes, on the other hand, are resource intensive to produce (land, water, energy), and are generally less effective as colorants. Between these two extremes would be synthetic dyes that are fully sourced from biomass-derived intermediates. The present work describes the synthesis of such compounds, containing strong chromophores that lead to bright colors in the yellow to red region of the visible spectrum. The study was originally motivated by an early report of an unidentified halomethylfurfural derivative which resulted from hydrolysis in the presence of barium carbonate, now characterized as a butenolide of 5-(hydroxymethyl)furfural (HMF). The method has been generalized for the synthesis of dyes from other biobased platform mols., and a mechanism is proposed.

Although many compounds look similar to this compound(591-12-8)Related Products of 591-12-8, numerous studies have shown that this compound(SMILES:O=C1OC(C)=CC1), has unique advantages. If you want to know more about similar compounds, you can read my other articles.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia

The three-dimensional configuration of the ester heterocycle is basically the same as that of the carbocycle. Compound: 5-Methylfuran-2(3H)-one(SMILESS: O=C1OC(C)=CC1,cas:591-12-8) is researched.Related Products of 591-12-8. The article 《Humins with Efficient Electromagnetic Wave Absorption: A By-Product of Furfural Conversion to Isopropyl Levulinate via a Tandem Catalytic Reaction in One-Pot》 in relation to this compound, is published in Chemistry – A European Journal. Let’s take a look at the latest research on this compound (cas:591-12-8).

Both one-pot catalytic conversion of furfural (FAL) to iso-Pr levulinate (PL) and carbonization of byproduct (humins) for electromagnetic wave absorption are discussed, which provides inspiration that humins can be applied to electromagnetic wave absorption. In the former, phosphotungstic acid (PW) is employed as a homogeneous catalyst to convert FAL to PL via a tandem reaction in one pot, with the formation of a vast amount of humins. With FAL and various intermediates as substrates, it was found that humins was a polymerization product of FAL, furfuryl alc. (FOL) and furfuryl ester (FE) with furan rings. In addition, the in situ attenuated total reflection IR (ATR-IR) spectra also provided a basis for the proposed reaction route. In the latter, with the humins as raw material, P species and WO3 doped nano-porous carbon (Humins-700) platform formed after high-temperature annealing is used for electromagnetic wave absorption and manifests desirable absorption performance. The min. reflection loss (RLmin) value is -47.3 dB at 13.0 GHz with a thickness of 2.0 mm and the effective absorption bandwidth reaches 4.5 GHz (11.2-5.7 GHz).

Although many compounds look similar to this compound(591-12-8)Application of 591-12-8, numerous studies have shown that this compound(SMILES:O=C1OC(C)=CC1), has unique advantages. If you want to know more about similar compounds, you can read my other articles.

Reference:
Pyrimidine | C4H4N2 – PubChem,
Pyrimidine – Wikipedia